histats.com

How To Make French Drains

How To Make French Drains. 1 how much does a ton of gravel cover? How to make a french drain.

Installing a French Drain BLACK+DECKER
Installing a French Drain BLACK+DECKER from blackanddecker.com

French drain detail showing a cross section showing the graded stones and a perforated drainage pipe. French drain installation if you decide to install a french drain, these steps will guide you through the process: Once you determine the location, mark it with spray paint or flags.

1 How Much Does A Ton Of Gravel Cover?


Dig a trench from the place in your yard that needs drainage to your chosen outlet. If you are not 100% confid. When adding an interior french drain a channel is chipped out of the concrete along the perimeter of the basement floor.

1 Cubic Yard Of Gravel Can Weigh Between 2,400 To 2,900 Lbs.


Perforated pipe is then placed within the channel which will direct the water to a collection tank within the floor. French drain detail showing a cross section showing the graded stones and a perforated drainage pipe. Here are a few steps you can take to see if your french drain is working correctly:

A French Drain Needs A Slope Of No Less Than 1%.


A diy french drain can redirect groundwater, and surface water into or away from any area you want. This aids the flow of water and filters out debris. Check for underground utility lines and pipes before digging.

6 Fill The Trench Around The Piping With Drainage Gravel.


How to make a french drain. Once you determine the location, mark it with spray paint or flags. How to build a french drain correctly what you need trenching shovel (or power trencher from rental company) perforated drain tubing with a fabric sock over it gravel (but not limestone, as it turns to concrete) landscape fabric that allows water through post hole digger or auger catch basins to allow water into the drains first step

A Newer Method Now Used In The Installation Of French Drains Is The Use Of A Landscape Fabric, Perforated Pipe And Aggregate.


A french drain, also called a curtain drain, is made by placing a perforated pipe in a trench that has been filled with gravel. The sides of the trench should slope away from the building at no less than a 45 degree angle to ensure the surrounding ground remains stable. Check your lawn for surface water check your basement walls for moisture, mold, or dripping water dig through the gravel that is covering the pipe and check for signs of flooding or leaking examine the drain's.

More Articles

Subscribe to receive free email updates:

0 Response to "How To Make French Drains"

Posting Komentar